Serving our customers with quality and safety first.
0.104in. and 0.114in. ⁓1/8"
0.245in. and 0.255in.
0.0388in. and 0.0488in.
0.054 in. rad 0.125 in. from center opposite slot
black
steel
QQ-S-698 fed spec single material response
oxide film
slotted
1EA
Slotted
Steel
0.0388 inches minimum and 0.0488 inches maximum
0.245 inches minimum and 0.255 inches maximum
0.104 inches minimum and 0.114 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
slotted oxide film surface treated 0.054 in. rad 0.125 in. from center opposite slot 0.0388" material thickness 0.245" outside diameter 0.104" hole diameter
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. its two flat parallel bearing surfaces are divided or cut along the radius, leaving a cleft, fissure, or cutaway portion across the rim which extends from the outer circumference to the washer hole and is always as large as, or larger than the diameter of the hole.