P06-03

P0603 Sleeve Nut

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. P06-03 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2b

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Nut Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.

sleeve

Nut Length
A measurement of the longest dimension of the nut,in distinction from width.

0.190in. ⁓13/64"

Boss Thickness

0.108in. and 0.138in.

Nut Width Across Flats
A measurement of the width across the flats of a nut.

0.741in. and 0.752in.

Cross-sectional Shape
The geometric configuration of the item when viewed in cross section.

hexagonal nut

Cross-sectional Shape
The geometric configuration of the item when viewed in cross section.

round boss

Thread Series
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

unc

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

13

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.500in. ⁓1/2"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

sleeve contains a nylon insert for locking purposes

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polyamide locking insert

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

zinc except insert

Answers.

What quantity is this sold in?

1EA

What material is the sleeve nut made of ?

Plastic polyamide locking insert

What is the thread quantity per inch?

13

What is the thread direction?

Right-hand

What is the thread class?

2b

What is the NSN for P06-03?

5310-01-066-4059

What's the federal classification of P06-03?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-01-066-4059 NUT,SLEEVE

zinc except insert surface treated sleeve contains a nylon insert for locking purposes 13 thread quantity per inch right-hand 2b thread class

NIIN
010664059
NIIN Date
10/09/78
Schedule B
 
Name Code
29735
FIIG
A021A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$23.00 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 
  • - Spain 
  • - Australia 

Availability for P06-03 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc 
NMFC (national motor freight code)
156600 PLASTIC/RUBBER ARTICLE VIZ: 
UFC (universal freight code)
77670 

Similar by Design Other nuts with similar characteristics

Nothing similar to this part number was found in our inventory

P06-03 / Nut,sleeveWhat is the formal definition of this item?

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.