Serving our customers with quality and safety first.
2b
RIGHT-Hand
0.540in. nut
sleeve
1.500in.
1.630in. ⁓1-41/64"
0.500in.
0.001in.
nosepiece assembly; w/s: virginia class submarine, SSN-774
0.500in.
2 drilled
square nut
not rated
unc
13
not rated
0.500in. ⁓1/2"
configuration c
90.0 degrees nut
boss does not EXIST--Sleeve is threaded completely through; shape is rectangular (1.0in. long x 1.5in. wide x 1.063in. high) with intersecting hole placed centered along the 1.0 inch side and at 1.125in. from base
aluminum alloy
ASTM-B150 assn std all material responses
1EA
Aluminum alloy
13
Right-hand
2b
Schedule B number: 7616995095
nmfc 024850
Articles of aluminum nesoi
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on nosepiece assembly; w/s: virginia class submarine, ssn-774. boss does not exist--sleeve is threaded completely through; shape is rectangular (1.0" long x 1.5" wide x 1.063" high) with intersecting hole placed centered along the 1.0 inch side 13 thread quantity per inch right-hand 2b thread class
1. | 752-7068430-18 | Cage 53711 |
Nothing similar to this part number was found in our inventory
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.