31640-61134

3164061134 Sleeve Nut

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 31640-61134 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2b

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.430in. ⁓7/16"

Flange Diameter
The length of a straight line which passes through the center of a flange,and terminates at the circumference.

1.502in.

Flange Thickness
A measurement of the smallest dimension of a flange,in distinction from length or width.

0.065in.

Nut Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.

sleeve

Nut Diameter

1.253in.

Nut Length
A measurement of the longest dimension of the nut,in distinction from width.

0.590in. ⁓19/32"

Cross-sectional Shape
The geometric configuration of the item when viewed in cross section.

round first end

Temp Rating
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.

not rated

Thread Series
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

unf

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

12

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

not rated

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

1.125in. ⁓1-1/8"

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

navy special project

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

6 holes on flange 0.060 dia

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize

Answers.

What material is the sleeve nut made of ?

Aluminum alloy

What is the thread quantity per inch?

12

What is the thread length?

0.430 inches

What is the thread direction?

Right-hand

What is the thread class?

2b

What is the NSN for 31640-61134?

5310-00-943-8177

How is this classified for shipping?

Schedule B number: 7616995095
nmfc 013540
Articles of aluminum nesoi

What's the federal classification of 31640-61134?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-00-943-8177 NUT,SLEEVE

anodize surface treated 6 holes on flange 0.060 dia navy special project 12 thread quantity per inch 0.430" thread length right-hand 2b thread class

NIIN
009438177
NIIN Date
02/02/66
Schedule B
7616995095 
Name Code
29735
FIIG
A021A0
QUP
 
Historical Price
$19.43 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for 31640-61134 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
013540 ALUM NUTS 
UFC (universal freight code)
05680 

Similar by Design Other nuts with similar characteristics

Nothing similar to this part number was found in our inventory

31640-61134 / Nut,sleeveWhat is the formal definition of this item?

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.