Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 113-4668721-22 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of a flange,and terminates at the circumference.
432.0 mm
A measurement of the smallest dimension of a flange,in distinction from length or width.
7.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
sleeve
374.0 mm
A measurement of the longest dimension of the nut,in distinction from width.
34.0 mm
Indicates the type and number of holes provided.
8 tapped
The geometric configuration of the item when viewed in cross section.
round
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
mj
A designation that is used for the purpose of general identification of the thread.
338.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
6.00
The style designation that most nearly corresponds to the appearance of the hole configuration.
configuration j
The nominal length of a straight line which passes through the center of the threaded hole,and terminates at the circumference.
10.0 mm
The distance between corresponding points on two adjacent threads measured parallel to the hole thread axis,expressed in millimeters.
1.50
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.
4H6H internal
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
eight drive slots through flange od
Answers.
1EA
Right-hand
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-292-0387 NUT,SLEEVE
eight drive slots through flange od navy special project right-hand
- NIIN
- 012920387
- NIIN Date
- 01/10/89
- Schedule B
- Name Code
- 29735
- FIIG
- A021A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $257.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for 113-4668721-22 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 65.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 024850 BOAT HATCH COVER
- UFC (universal freight code)
- 11640
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
113-4668721-22 / Nut,sleeveWhat is the formal definition of this item?
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.
