1116934

1116934 Sleeve Nut

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 1116934 specification

Thread Pitch Diameters
The minimum and maximum pitch diameter limits of a straight screw thread.

+0.5625/+0.5665in.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Flange Diameter
The length of a straight line which passes through the center of a flange,and terminates at the circumference.

2.000in.

Flange Thickness
A measurement of the smallest dimension of a flange,in distinction from length or width.

0.156in.

Nut Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.

sleeve

Nut Diameter

0.500in. and 0.506in.

Nut Length
A measurement of the longest dimension of the nut,in distinction from width.

1.062in. ⁓1-1/16"

Drilled Hole Diameter
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.

0.161in. and 0.164in.

Hole Type And Quantity
Indicates the type and number of holes provided.

16 drilled

Cross-sectional Shape
The geometric configuration of the item when viewed in cross section.

round

Thread Series
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

unc

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

12

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.562in. ⁓9/16"

Hole Configuration Style
The style designation that most nearly corresponds to the appearance of the hole configuration.

configuration j

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

16 holes around flange 0.156 in. dia

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

copper alloy

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-B-636 fed spec single material response

Answers.

What material is the sleeve nut made of ?

Copper alloy

What is the thread quantity per inch?

12

What is the thread direction?

Right-hand

What is the NSN for 1116934?

5310-00-094-1761

How is this classified for shipping?

Schedule B number: 7415290000
nmfc 093460
Copper screws, nuts, bolts, rivets, and other fasteners not threaded

What's the federal classification of 1116934?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-00-094-1761 NUT,SLEEVE

16 holes around flange 0.156 in. dia 12 thread quantity per inch right-hand

NIIN
000941761
NIIN Date
01/01/63
Schedule B
7415290000 
Name Code
29735
FIIG
A021A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Canada 
  • - Portugal 
  • - Greece 

Availability for 1116934 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093460 BOLTS/NUTS NOI BBC/ZINC 
UFC (universal freight code)
48930 

Similar by Design Other nuts with similar characteristics

Nothing similar to this part number was found in our inventory

1116934 / Nut,sleeveWhat is the formal definition of this item?

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.