Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 0N503165 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
0.117in. except threads and 0.123in. except threads
The length of a straight line which passes through the center of a flange,and terminates at the circumference.
0.250in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.060in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
sleeve
0.152in. and 0.154in.
A measurement of the longest dimension of the nut,in distinction from width.
0.180in. ⁓3/16"
The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.
0.180in. except threads
The geometric configuration of the item when viewed in cross section.
round
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unc
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
A designation that is used for the purpose of general identification of the thread.
0.112in. ⁓1/8"
The style designation that most nearly corresponds to the appearance of the hole configuration.
configuration g
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 360
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-B-626 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, class 2, type 2 fed spec single treatment response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
98230-0N503165 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Answers.
1EA
Copper alloy 360
40
Right-hand
2b
Schedule B number: 7415290000
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-055-8423 NUT,SLEEVE
cadmium surface treated 40 thread quantity per inch right-hand 2b thread class
- NIIN
- 010558423
- NIIN Date
- 02/12/78
- Schedule B
- 7415290000
- Name Code
- 29735
- FIIG
- A021A0
- Item Weight
- 0.100lbs
- Item Dimensions
- 49 X 30 X 5
- QUP
- 1
- Historical Price
- $1.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - Department of The Army
- - Spain
- - Australia
- - Canada
- - New Zealand
- - France
- - Italy
- - Greece
- - Turkey
Availability for 0N503165 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
0N503165 / Nut,sleeveWhat is the formal definition of this item?
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.
