Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. N037518S specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.090in. and 0.150in. ⁓5/32"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.165in. and 0.195in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.360in. and 0.390in.
The distance measured in a straight line from the bottom to the top of an item.
0.088in. and 0.118in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
washer contains backing media made from ST0304, corroion resisting steel
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber chloroprene class cr
Answers.
Rubber chloroprene class cr
0.360 inches minimum and 0.390 inches maximum
0.090 inches minimum and 0.150 inches maximum
Schedule B number: 4016930000
nmfc 093486
Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-377-3271 WASHER,SHOULDERED
washer contains backing media made from ST0304, corroion resisting steel 0.360" outside diameter 0.090" hole diameter
- NIIN
- 013773271
- NIIN Date
- 07/14/93
- Schedule B
- 4016930000
- Name Code
- 15934
- FIIG
- A022B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $3.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 1576AS301 | Cage 30003 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - United Kingdom
Availability for N037518S A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
N037518S / Washer,shoulderedWhat is the formal definition of this item?
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
