Serving our customers with quality and safety first.
0.115in. and 0.125in. ⁓1/8"
0.137in. and 0.147in.
0.230in. and 0.250in.
0.242in. and 0.258in.
0.203in.
ALQ172Ant cnt; aircraft
plastic
astm D4066 assn std single material response
shouldered
81349-MIL-W-45595/9/inactive/ government specification
1EA
Shouldered
Plastic
0.230 inches minimum and 0.250 inches maximum
0.115 inches minimum and 0.125 inches maximum
Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on alq172ant cnt;aircraft. shouldered 0.230" outside diameter 0.115" hole diameter
1. | MIL-W-45595/9 | Cage 81349 |
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.