Serving our customers with quality and safety first.
1.495in. and 1.525in. ⁓1-17/32"
1.960in. and 1.990in.
2.720in. and 2.780in.
0.860in. and 0.890in.
0.410in. and 0.470in.
aluminum alloy 6061
QQ-A-200/8 fed spec single material response
shouldered
Shouldered
Aluminum alloy 6061
2.720 inches minimum and 2.780 inches maximum
1.495 inches minimum and 1.525 inches maximum
Schedule B number: 7616108000
nmfc 093486
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered 2.720" outside diameter 1.495" hole diameter
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.