Serving our customers with quality and safety first.
0.500in. and 0.505in. ⁓33/64"
0.573in. and 0.583in.
0.734in. and 0.766in.
0.060in. and 0.063in.
0.029in. and 0.039in.
copper alloy 360
QQ-B-626 fed spec single material response
nickel
QQ-N-290 clall 1 type 7 fed spec single treatment response
shouldered
Shouldered
Copper alloy 360
0.029 inches minimum and 0.039 inches maximum
0.734 inches minimum and 0.766 inches maximum
0.500 inches minimum and 0.505 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered nickel surface treated 0.029" material thickness 0.734" outside diameter 0.500" hole diameter
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.