Serving our customers with quality and safety first.
4.9380in. and 4.9395in. ⁓4-61/64"
5.1275in. and 5.1290in.
5.500in.
0.320in.
0.061in. and 0.062in.
aluminum alloy 7075
QQ-A-225/9, temper T73 fed spec single material response
shouldered
1EA
Shouldered
Aluminum alloy 7075
0.061 inches minimum and 0.062 inches maximum
5.500 inches
4.9380 inches minimum and 4.9395 inches maximum
Schedule B number: 7616108000
nmfc 194120
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered 0.061" material thickness 5.500" outside diameter 4.9380" hole diameter
1. | 1958C519 | Cage 13002 |
2. | 10122165 | Cage A486G |
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.