Serving our customers with quality and safety first.
0.814in. and 0.815in. ⁓53/64"
0.988in. and 0.989in.
1.380in.
0.178in. and 0.182in.
0.158in. and 0.162in.
63.0 microinches bottom
aluminum alloy 7075
QQ-A-225/9, temper T7351 fed spec single material response
shouldered
On 07/21/2014 under contract SPM5AY11D00010027 for qty 11
1EA
Shouldered
Aluminum alloy 7075
0.158 inches minimum and 0.162 inches maximum
1.380 inches
0.814 inches minimum and 0.815 inches maximum
Schedule B number: 7616108000
nmfc 194120
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered 0.158" material thickness 1.380" outside diameter 0.814" hole diameter
1. | 10122161 | Cage A486G |
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.