Serving our customers with quality and safety first.
1.375in. and 1.378in. ⁓1-25/64"
1.627in. and 1.628in.
1.875in.
0.248in.
0.093in. and 0.096in.
55.0 rockwell c and 60.0 rockwell c
steel comp 440c
QQ-S-763 cl 10 ty a fed spec single material response
shouldered
Shouldered
Steel comp 440c
0.093 inches minimum and 0.096 inches maximum
1.875 inches
1.375 inches minimum and 1.378 inches maximum
Schedule B number: 7318220000
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered 0.093" material thickness 1.875" outside diameter 1.375" hole diameter
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.