Serving our customers with quality and safety first.
0.136in. and 0.146in. ⁓5/32"
0.177in. and 0.187in.
0.310in. and 0.330in.
0.159in. and 0.189in.
0.100in. and 0.110in.
navy special project
plastic polyhexamethylene adipamide
L-P-410 6/6 fed spec single material response
shouldered
Shouldered
Plastic polyhexamethylene adipamide
0.310 inches minimum and 0.330 inches maximum
0.136 inches minimum and 0.146 inches maximum
Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered navy special project 0.310" outside diameter 0.136" hole diameter
Nothing similar to this part number was found in our inventory
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.