Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 532042-002 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.139in. and 0.144in. ⁓5/32"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.244in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.380in.
0.050in. and 0.070in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.110in. and 0.120in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic phenolic
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-P-79 type pbe mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered
Answers.
Shouldered
Plastic phenolic
0.110 inches minimum and 0.120 inches maximum
0.380 inches
0.139 inches minimum and 0.144 inches maximum
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-682-5624 WASHER,SHOULDERED
shouldered 0.110" material thickness 0.380" outside diameter 0.139" hole diameter
- NIIN
- 006825624
- NIIN Date
- 01/01/63
- Schedule B
- 3926904500
- Name Code
- 15934
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Turkey
Availability for 532042-002 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
532042-002 / Washer,shoulderedWhat is the formal definition of this item?
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
