Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 205-040-120-1 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
2.423in. and 2.430in. ⁓2-7/16"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
2.562in. and 2.563in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.790in. and 2.810in.
0.260in. and 0.280in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.080in. and 0.090in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
145000 pounds per square inch
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
63.0 microinches all surfaces
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
two diametrically opposite holes, 0.077 in. min, 0.082 in. max dia. located on the shouldered portion, 0.180 in. nom distance from center of hole to bearing surface of washer. holes drilled on a 60 deg angle
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS6381 assn std single material response or MIL-S-5626, cond C1 mil spec single material response or MIL-S-6758, cond D1 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered
Answers.
1EA
Shouldered
Steel
0.080 inches minimum and 0.090 inches maximum
2.790 inches minimum and 2.810 inches maximum
2.423 inches minimum and 2.430 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-071-0907 WASHER,SHOULDERED
shouldered two diametrically opposite holes, 0.077 in. min, 0.082 in. max dia. located on the shouldered portion, 0.180 in. nom distance from center of hole to bearing surface of washer. holes drilled on a 60 deg angle 0.080" material thickness 2.790" outside diameter 2.423" hole diameter
- NIIN
- 000710907
- NIIN Date
- 01/01/63
- Schedule B
- 7318220000
- Name Code
- 15934
- FIIG
- A022B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $45.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 205-040-120-001 | Cage 97499 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Army
- - Brazil
- - Spain
- - New Zealand
- - Turkey
Availability for 205-040-120-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
205-040-120-1 / Washer,shoulderedWhat is the formal definition of this item?
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
