Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12592577 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.250in. ⁓1-1/4"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
1.8115in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.520in.
The distance measured in a straight line from the bottom to the top of an item.
0.600in.
0.235in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.365in.
The national stock number or the identification information of the end equipment for which the item is a part.
M119A1 howitzer
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
24.0 rockwell c and 31.0 rockwell c
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered
Answers.
1EA
Shouldered
Steel
0.365 inches
2.520 inches
1.250 inches
Schedule B number: 7318220000
nmfc 097510
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-342-0315 WASHER,SHOULDERED
Used on m119a1 howitzer. shouldered 0.365" material thickness 2.520" outside diameter 1.250" hole diameter
- NIIN
- 013420315
- NIIN Date
- 07/14/91
- Schedule B
- 7318220000
- Name Code
- 15934
- FIIG
- A022B0
- Item Weight
- 4.000lbs
- Item Dimensions
- 46 X 61 X 6
- QUP
- 1
- Historical Price
- $392.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 12592577 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 65.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Arms/weapons (all types including inert component parts). when a 2" is indicated in the first position, then the special handlin
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 097510 WASHERS I/S CHROMIUM/NICKEL PLATED
- UFC (universal freight code)
- 55220
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
12592577 / Washer,shoulderedWhat is the formal definition of this item?
A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
