Serving our customers with quality and safety first.
0.515in. ⁓33/64"
0.750in.
1.440in.
0.610in.
0.110in.
0.080in. and 0.090in.
88.0 degrees and 92.0 degrees
aluminum alloy 7075
QQ-A-225/9, T7351 fed spec single material response
shouldered and recessed
1EA
Shouldered and recessed
Aluminum alloy 7075
0.080 inches minimum and 0.090 inches maximum
1.440 inches
0.515 inches
Schedule B number: 7616108000
nmfc 194120
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
shouldered 0.080" material thickness 1.440" outside diameter 0.515" hole diameter
1. | 10109701 | Cage A486G |
Nothing similar to this part number was found in our inventory
A washer, round in shape, having a centrally located hole. one bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing, sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.