Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 117-103-3 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.251in. and 0.253in. ⁓17/64"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.312in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.687in.
0.030in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.015in.
30.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered and recessed
Answers.
Shouldered and recessed
Steel comp 302
0.015 inches
0.687 inches
0.251 inches minimum and 0.253 inches maximum
Schedule B number: 7616108000
nmfc 194160
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-984-8405 WASHER,SHOULDERED AND RECESSED
shouldered 0.015" material thickness 0.687" outside diameter 0.251" hole diameter
- NIIN
- 009848405
- NIIN Date
- 10/26/66
- Schedule B
- 7616108000
- Name Code
- 15935
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Spain
- - Australia
Availability for 117-103-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
117-103-3 / Washer,shouldered and recessedWhat is the formal definition of this item?
A washer, round in shape, having a centrally located hole. one bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing, sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
