Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CB4022V3CR8P750 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque all metal design
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
0.270in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.120in. and 0.180in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
spline (floating)
A measurement of the longest dimension of the nut,in distinction from width.
0.587in. ⁓19/32"
0.290in. and 0.350in. ⁓23/64"
The shortest straight line between flats,perpendicular to the height.
0.405in. ⁓13/32"
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
base plate material glass/ thermoplastics, 350 degrees f, finish abrasive clean, nut can be removed from retainer and replaced, base plate angle length 0.500, base PLATE-Epoxy primer per MIL-P-85582
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 shell or steel comp 304 shell or steel comp 305 shell
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5525 assn std single material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5525 assn std single material response shell or ams 5639 assn std single material response shell or ams 5514 assn std single material response shell
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate shell
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response shell
Answers.
1EA
Iron alloy 660 shell or steel comp 304 shell or steel comp 305 shell
Iron alloy 660 nut
32
Right-hand
3b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-532-7283 NUT,SELF-LOCKING,SPLINE
passivate shell surface treated base plate material glass/ thermoplastics, 350 degrees f, finish abrasive clean, nut can be removed from retainer 32 thread quantity per inch right-hand 3b thread class
- NIIN
- 015327283
- NIIN Date
- 08/17/05
- Schedule B
- 7318160000
- Name Code
- 15893
- FIIG
- A021A0
- QUP
- 1
- Historical Price
- $18.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3D0260-102TP | Cage 88277 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for CB4022V3CR8P750 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
CB4022V3CR8P750 / Nut,self-locking,splineWhat is the formal definition of this item?
A nut having an externally splined sleeve, which holds it in position when forced into a hole of slightly smaller diameter. an integral feature is incorporated for locking.
