Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. BACN10GR26L specification
The minimum and maximum pitch diameter limits of a straight screw thread.
+2.5119/+2.5170in.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque with nonmetallic insert
0.094in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
round
3.110in. and 3.130in.
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.
0.445in. and 0.475in.
0.250in.
4
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
250.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
uns
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
A designation that is used for the purpose of general identification of the thread.
2.548in. ⁓2-9/16"
The included angle of the countersink.
100.0 degrees nut
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
threads square with bearing surface by 0.002 in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyamide locking insert
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 2nd material response nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide nut
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924, cl 2 mil spec single treatment response nut
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-I-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The document designator of the specification or standard which established the item of supply.
81205-BACN10Gr manufacturers standard
Answers.
1EA
Steel comp 4130 nut
Plastic polyamide locking insert
18
Right-hand
Schedule B number: 7318160000
nmfc 000000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-764-9508 NUT,SELF-LOCKING,ROUND
oxide nut surface treated threads square with bearing surface by 0.002 in. 18 thread quantity per inch right-hand
- NIIN
- 007649508
- NIIN Date
- 01/01/60
- Schedule B
- 7318160000
- Name Code
- 15895
- FIIG
- A021A0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $209.60 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | BACN10GR26 | Cage 77272 |
| 2. | BACN10GR26 | Cage 81205 |
Major End Users Countries and entities
- - Department of The Navy
Availability for BACN10GR26L A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- No rating
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 000000 NO NMFC FREIGHT DESCRIPTION
- UFC (universal freight code)
- 00000
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
BACN10GR26L / Nut,self-locking,roundWhat is the formal definition of this item?
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. an integral feature is incorporated for locking on the threads of a mating member. do not use if a more specific item name applies. excludes collar, pin-rivet, threaded; insert, screw thread; nut (1), sleeve; nut(1), plain, cap; and turnbuckle body.
