Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ET237RCM5-1 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque with nonmetallic insert
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
2.4 mm and 2.6 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
plate (floating)
12.7 mm
A measurement of the smallest dimension of a plate,in distinction from length or width.
0.5 mm and 0.7 mm
A measurement taken at right angles to the length of a plate,in distinction from thickness.
14.6 mm
The means by which the nut is mounted.
straight holes
The side of the plate that the countersink or welding projections are located.
opposite nut projection side
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
2 holes
A measurement of the center to center distance between the mounting holes along the length.
17.4 mm and 17.5 mm
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
232.0 deg celsius
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
mj
A designation that is used for the purpose of general identification of the thread.
5.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.80
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 shell
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyamide locking insert
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 316 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5525 assn std single material response shell
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-R-46198 mil spec single material response locking insert
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec single material response nut
An indication of the precious material and its location in the item.
surface of nut and basket silver
Identification of the precious material contained in the item.
silver
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
silver nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
silver shell
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS2410 assn std single treatment response shell
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
AMS2410 assn std single treatment response nut
Answers.
Steel comp 316 nut
Plastic polyamide locking insert
Iron alloy 660 shell
Right-hand
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-519-9217 NUT,SELF-LOCKING,PLATE
silver shell surface treated right-hand
- NIIN
- 015199217
- NIIN Date
- 05/06/04
- Schedule B
- 7318160000
- Name Code
- 05280
- FIIG
- A021A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | FON20-7510-5 | Cage H1822 |
| 2. | FON20-7510-5 | Cage H1822 |
| 3. | FON20-7510-5 | Cage H1822 |
| 4. | FON20-7510-5 | Cage H1822 |
| 5. | FON20-7510-5 | Cage H1822 |
Major End Users Countries and entities
- - Australia
- - France
- - Germany
- - Netherlands
- - Portugal
- - Italy
- - Norway
Availability for ET237RCM5-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
ET237RCM5-1 / Nut,self-locking,plateWhat is the formal definition of this item?
A nut with a flanged base of varied shapes which may be plain or mounted by rivets, bolts, welding or integral prongs. an integral feature is incorporated for locking on the threads of a mating member.
