Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A6293-15-048 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque all metal design
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film lubricant
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.098in. and 0.103in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
plate
The means by which the nut is mounted.
straight holes
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
2 holes
0.562in.
A measurement of the center to center distance between the mounting holes along the length.
1.125in.
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
250.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
Those features,not otherwise specified,which may be required for proper functioning of the item.
floating nut
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
spring loaded w/ clip
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 601 base
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 601 shell
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate base
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate shell
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 3 fed spec single treatment response nut
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
72962-A6293 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.
as modified by spring load and torque test
Answers.
Steel nut
Steel comp 601 shell
Steel comp 601 base
28
Right-hand
3b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-006-7051 NUT,SELF-LOCKING,PLATE
passivate shell surface treated spring loaded w/ clip 28 thread quantity per inch right-hand 3b thread class
- NIIN
- 010067051
- NIIN Date
- 07/21/75
- Schedule B
- 7318160000
- Name Code
- 05280
- FIIG
- A021A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-N-25027 | Cage 81349 |
Major End Users Countries and entities
- - France
Availability for A6293-15-048 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
A6293-15-048 / Nut,self-locking,plateWhat is the formal definition of this item?
A nut with a flanged base of varied shapes which may be plain or mounted by rivets, bolts, welding or integral prongs. an integral feature is incorporated for locking on the threads of a mating member.
