Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. E-74114PC120 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque with nonmetallic insert
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
hexagon
0.298in. and 0.328in. ⁓21/64"
The shortest straight line between flats,perpendicular to the height.
0.741in. and 0.752in. ⁓49/64"
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
250.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.500in. ⁓1/2"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
Indicates the type of bearing surface.
chamfered
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
as differentiated by material which must conform to ships parts control center special quality control provisions
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyamide locking insert
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel nut
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
Steel nut
Plastic polyamide locking insert
20
Right-hand
2b
Schedule B number: 7318160000
nmfc 000000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-081-0780 NUT,SELF-LOCKING,HEXAGON
as differentiated by material which must conform to ships parts control center special quality control provisions 20 thread quantity per inch right-hand 2b thread class
- NIIN
- 010810780
- NIIN Date
- 08/08/79
- Schedule B
- 7318160000
- Name Code
- 05277
- FIIG
- A021A0
- Item Weight
- 2.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $46.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 29NTE-080 | Cage 00360 |
| 2. | 29NTE-080 | Cage 3U925 |
| 3. | 29NTE-080 | Cage 72962 |
Major End Users Countries and entities
- - Department of The Navy
Availability for E-74114PC120 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- No rating
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 000000 NO NMFC FREIGHT DESCRIPTION
- UFC (universal freight code)
- 00000
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
E-74114PC120 / Nut,self-locking,hexagonWhat is the formal definition of this item?
A nut having a flat bottom and 6 sides. an integral feature is incorporated for locking on the threads of a mating member. excludes nut (1), self-locking, cap.
