Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1734-8L15P specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
eliptical countersunk
A measurement from the bottom to the top of the head,in distinction from depth.
0.058in. ⁓1/16"
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque all metal design
0.773in. and 0.797in.
0.655 mils
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film lubricant
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
blind rivet w/smooth round shank
0.612in. and 0.614in.
A measurement of the longest dimension of the nut,in distinction from width.
1.719in. and 1.749in. ⁓1-3/4"
The area between the maximum and minimum thickness of material in which a specific blind rivet nut can be properly installed.
+0.860/+0.880in.
Indicates the type of end included on the shank.
open
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
450.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.500in. ⁓1/2"
75.0 degrees and 77.0 degrees
59.0 degrees and 61.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
nut, SELF-Locking, blind rivet, ellipital head, 450 degrees f
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
lubrication is only on the threads; tensile strength 21, 110 lbs min; torque out in 860 lbs min; push out 2, 280 lbs min
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 or steel comp 305
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763, cond a type 304 fed spec single material response or QQ-S-763, cond a type 305 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type ii class 2 fed spec single treatment response
Answers.
Steel comp 304 or steel comp 305
20
Eliptical countersunk
Right-hand
3b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-586-2660 NUT,SELF-LOCKING,BLIND RIVET
cadmium surface treated lubrication is only on the threads; tensile strength 21, 110 lbs min; torque out in 860 lbs min; push out 2, 280 lbs min nut, self-locking, blind rivet, ellipital head, 450 degrees f 20 thread quantity per inch eliptical countersunk head style right-hand 3b thread class
- NIIN
- 015862660
- NIIN Date
- 06/22/10
- Schedule B
- 7318160000
- Name Code
- 29724
- FIIG
- A021A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Republic of Korea
Availability for NAS1734-8L15P A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1734-8L15P / Nut,self-locking,blind rivetWhat is the formal definition of this item?
A metallic headed fastener having internal threads for a portion of the full length. it may have a smooth, hexagon or splined shank with an open or closed end. it is designed to be expanded tightly against the material it is being installed in by means of a special tool. the item must have a specified grip range. the grip range is the thickness of the material the item is being installed in. an integral feature is incorporated for locking on the threads of a mating member.
