Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 17G235072-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.
prevailing torque all metal design
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
floating SELF-Locking barrel
1.556in. and 1.559in.
A measurement of the longest dimension of the nut,in distinction from width.
1.718in. and 1.738in. ⁓1-3/4"
0.870in. and 0.880in.
1.281in. ⁓1-9/32"
The national stock number or the identification information of the end equipment for which the item is a part.
C-17A aircraft
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
900.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12
A designation that is used for the purpose of general identification of the thread.
1.000in. ⁓1/64"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
altered ITEM-Do not paint threaded hole; if threads are deformed retap threads per MIL-S-8879; prime and DN2138 lusterless red epoxy coat per dps 4.50-36 on exterior of cradle only MIL-P-23377 and MIL-C-83266; nut secured in cradle with roll pins
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 base or nickel alloy 718 base
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 718 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5662 assn std single material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5732 assn std single material response base or ams 5737 assn std single material response base or ams 5662 assn std single material response base
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
silver nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate base
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
ams 2411 assn std single treatment response nut
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response base
Answers.
1EA
Nickel alloy 718 nut
Iron alloy 660 base or nickel alloy 718 base
12
Right-hand
3b
Schedule B number: 7508900000
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-505-4652 NUT,SELF-LOCKING,BARREL
Used on c-17a aircraft. passivate base surface treated altered item-do not paint threaded hole; if threads are deformed retap threads per mil-s-8879; prime 12 thread quantity per inch right-hand 3b thread class
- NIIN
- 015054652
- NIIN Date
- 03/07/03
- Schedule B
- 7508900000
- Name Code
- 15891
- FIIG
- A021A0
- QUP
- 1
- Historical Price
- $1,100.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 17G235072-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
17G235072-1 / Nut,self-locking,barrelWhat is the formal definition of this item?
A nut of cylindrical or partly cylindrical cross-section with integral threads perpendicular to the axial centerline. ends may be flat or flanged. an integral feature is incorporated for locking on the threads of a mating member. excludes nut (1), self-locking, round.
