Serving our customers with quality and safety first.
0.124in. and 0.156in. ⁓5/32"
0.390in. and 0.422in.
0.500in. and 0.532in. ⁓35/64"
0.109in. and 0.141in.
0.578in.
material thickness 0.020 in. min 0.030 in. max
steel comp 1008 or steel comp 1009 or steel comp 1010 or steel comp 1011 or steel comp 1012 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018
astm A109 assn std all material responses
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
saddle
Saddle
Steel comp 1008 or steel comp 1009 or steel comp 1010 or steel comp 1011 or steel comp 1012 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018
0.578 inches
0.124 inches minimum and 0.156 inches maximum
Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
saddle cadmium surface treated material thickness 0.020 in. min 0.030 in. max 0.578" overall width 0.500" overall length 0.124" hole diameter
1. | MIL-W-45595/4 | Cage 81349 |
2. | 936A463-9 | Cage 83843 |
3. | 936A463-9 | Cage 99167 |
4. | MIL-W-45595/4 | Cage 81349 |
5. | 936A463-9 | Cage 83843 |
6. | 936A463-9 | Cage 99167 |
Nothing similar to this part number was found in our inventory
A washer with one surface shaped to fit a similarly curved surface, the other surface of the washer being either parallel with the shaped surface or in the form of raised boss having either a flat bearing surface or a recess designed for holding a nut. excludes washer (1), concave and washer (1), convex.