Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 30182 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.104in. ⁓7/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.250in. ⁓1/4"
The distance measured in a straight line from the bottom to the top of an item.
0.093in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.190in.
0.032in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
Answers.
1EA
Steel comp 302
0.190 inches
0.104 inches
Schedule B number: 7318220000
nmfc 116250
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-969-4044 WASHER,SADDLE
passivate surface treated 0.190" overall width 0.250" overall length 0.104" hole diameter
- NIIN
- 009694044
- NIIN Date
- 01/01/62
- Schedule B
- 7318220000
- Name Code
- 15898
- FIIG
- A022B0
- QUP
- 1
- Historical Price
- $3.98 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 6002-584 | Cage 05869 |
Major End Users Countries and entities
- - Spain
- - Turkey
Availability for 30182 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 100.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 116250 TYPEWRITERS/TELETYPEWRITERS/PARTS
- UFC (universal freight code)
- 59490
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
30182 / Washer,saddleWhat is the formal definition of this item?
A washer with one surface shaped to fit a similarly curved surface, the other surface of the washer being either parallel with the shaped surface or in the form of raised boss having either a flat bearing surface or a recess designed for holding a nut. excludes washer (1), concave and washer (1), convex.
