SS5103C06

SS5103C06 Recessed Washer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. SS5103C06 specification

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.378in. and 0.388in. ⁓25/64"

Outside Diameter
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.

0.687in.

Recess Diameter
The length of a straight line which passes through the center of the recess,and terminates at the circumference.

0.483in. and 0.495in.

Material Thickness
A measurement of the smallest dimension of the material,in distinction from length or width.

0.080in.

Recess Angle

45.0 degrees

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

15 recessed

Answers.

When was the most recent contract awarded?

On 06/26/2014 under contract SPE5E114V3382 for qty 21,095

What is the style?

15 recessed

What is the thickness?

0.080 inches

What is the outside diameter?

0.687 inches

What is the inside hole diameter?

0.378 inches minimum and 0.388 inches maximum

What is the NSN for SS5103C06?

5310-01-102-6105

What's the federal classification of SS5103C06?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-01-102-6105 WASHER,RECESSED

15 recessed 0.080" material thickness 0.687" outside diameter 0.378" hole diameter

NIIN
011026105
NIIN Date
10/23/80
Schedule B
 
Name Code
15933
FIIG
A022B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$0.50 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Army 
  • - Department of The Navy 
  • - Department of The Air Force 
  • - U.s. Coast Guard 
  • - Slovakia 
  • - Brazil 
  • - Spain 
  • - Singapore 
  • - Australia 
  • - New Zealand 
  • - Republic of Korea 
  • - Denmark 
  • - Turkey 

Availability for SS5103C06 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
50.0
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
194160 WASHER OR GASKETS, IRON OR STEEL, 
UFC (universal freight code)
55210 

Similar by Design Other washers with similar characteristics

Nothing similar to this part number was found in our inventory

SS5103C06 / Washer,recessedWhat is the formal definition of this item?

A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.