Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS9952-27 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.940in. and 1.950in. ⁓1-61/64"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
2.390in. and 2.410in.
The distance measured in a straight line from the bottom to the top of an item.
0.362in. and 0.388in.
A measurement between specified points on the recess,in distinction from height.
0.465in. and 0.476in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.033in. and 0.038in.
The national stock number or the identification information of the end equipment for which the item is a part.
AE1107, T406-AD-400, AE2100A, c, AE3007A, c, h and AE2100D2, D3, j engines
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
140.0 brinell hultgren and 220.0 brinell hultgren
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
approx weight 8.80 lb per 100; 2 tabs; tab width 0.240 min 0.245 maxin.; break sharp edges 0.003-0.010 unless otherwise specified
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5646 assn std single material response
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
fluorescent penetrant inspection per ams 2645
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
recessed
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
controlling agency nomenclature washer, cup LOCK-Spanner nut
Answers.
Recessed
Steel corrosion resisting
0.033 inches minimum and 0.038 inches maximum
2.390 inches minimum and 2.410 inches maximum
1.940 inches minimum and 1.950 inches maximum
Schedule B number: 7318220000
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-502-7160 WASHER,RECESSED
Used on ae1107, t406-ad-400, ae2100a, c, ae3007a, c, h and ae2100d2, d3, j engines. recessed approx weight 8.80 lb per 100; 2 tabs; tab width 0.240 min 0.245 max"; break sharp edges 0.003-0.010 unless otherwise specified 0.033" material thickness 2.390" outside diameter 1.940" hole diameter
- NIIN
- 015027160
- NIIN Date
- 11/18/02
- Schedule B
- 7318220000
- Name Code
- 15933
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Italy
Availability for MS9952-27 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
MS9952-27 / Washer,recessedWhat is the formal definition of this item?
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.
