Serving our customers with quality and safety first.
0.439in. and 0.807in. ⁓13/16"
0.807in. and 0.817in.
0.539in. and 0.549in.
0.071in. and 0.085in.
36.0 rockwell c and 45.0 rockwell c
90.0 degrees
125.0 microinches all surfaces
nickel alloy 718
ams 5596 assn std single material response and ams 5597 assn std single material response and AMS5662 assn std single material response
p" after dash number is designated for finish code as cadmium plate
15 recessed
96906-MS14183 rev. b government standard
15 recessed
Nickel alloy 718
0.071 inches minimum and 0.085 inches maximum
0.807 inches minimum and 0.817 inches maximum
0.439 inches minimum and 0.807 inches maximum
Schedule B number: 7508900000
nmfc 093486
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
15 recessed 0.071" material thickness 0.807" outside diameter 0.439" hole diameter
1. | MS14183 | Cage 96906 |
2. | MS14183-P7 | Cage 80205 |
3. | MS14183-P7 | Cage 96906 |
4. | MS14183 | Cage 96906 |
5. | MS14183-P7 | Cage 80205 |
6. | MS14183-P7 | Cage 96906 |
7. | MS14183 | Cage 96906 |
8. | MS14183-P7 | Cage 80205 |
9. | MS14183-P7 | Cage 96906 |
Nothing similar to this part number was found in our inventory
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.