GW10F-7A

GW10F7A Recessed Washer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. GW10F-7A specification

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.438in. and 0.440in. ⁓29/64"

Outside Diameter
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.

0.677in. and 0.697in.

Recess Diameter
The length of a straight line which passes through the center of the recess,and terminates at the circumference.

0.498in. and 0.520in.

Material Thickness
A measurement of the smallest dimension of the material,in distinction from length or width.

0.070in. and 0.090in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

150000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

33.0 rockwell c and 37.0 rockwell c

Recess Angle

90.0 degrees

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

navy special project

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

chamfer 45 deg by 0.030 in. min, 0.040 in. max on od recessed side

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 3 fed spec single treatment response

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

15 recessed

Answers.

What quantity is this sold in?

1EA

What is the style?

15 recessed

What material is the recessed washer made of ?

Steel comp 4130

What is the thickness?

0.070 inches minimum and 0.090 inches maximum

What is the outside diameter?

0.677 inches minimum and 0.697 inches maximum

What is the inside hole diameter?

0.438 inches minimum and 0.440 inches maximum

What is the NSN for GW10F-7A?

5310-01-064-3626

How is this classified for shipping?

Schedule B number: 7318220000
nmfc 194160
Washers other than lock washers, iron or steel

What's the federal classification of GW10F-7A?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-01-064-3626 WASHER,RECESSED

15 recessed cadmium surface treated chamfer 45 deg by 0.030 in. min, 0.040 in. max on od recessed side navy special project 0.070" material thickness 0.677" outside diameter 0.438" hole diameter

NIIN
010643626
NIIN Date
08/23/78
Schedule B
7318220000 
Name Code
15933
FIIG
A022B0
Item Weight
0.000lbs
Item Dimensions
QUP
Historical Price
$120.73 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 

Availability for GW10F-7A A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
194160 WASHER OR GASKETS, IRON OR STEEL, 
UFC (universal freight code)
55210 

Similar by Design Other washers with similar characteristics

Nothing similar to this part number was found in our inventory

GW10F-7A / Washer,recessedWhat is the formal definition of this item?

A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.