Serving our customers with quality and safety first.
0.331in. and 0.335in. ⁓11/32"
0.585in. and 0.605in.
0.410in. and 0.430in.
0.057in. and 0.069in.
90.0 degrees
navy special project
titanium alloy
MIL-T-9046, ty 3, comp c mil spec single material response
15 recessed
81205-BACW10Bx rev a manufacturers standard
15 recessed
Titanium alloy
0.057 inches minimum and 0.069 inches maximum
0.585 inches minimum and 0.605 inches maximum
0.331 inches minimum and 0.335 inches maximum
Schedule B number: 8108908000
nmfc 194160
Other wrought titanium
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
15 recessed navy special project 0.057" material thickness 0.585" outside diameter 0.331" hole diameter
Nothing similar to this part number was found in our inventory
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.