Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 803-5001048 PIECE 65 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.094in. ⁓1-3/32"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
3.718in. and 3.720in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.123in. and 0.127in.
1.124in. and 1.184in.
90.0 degrees
90.0 degrees
1.124in. and 1.184in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
chamfer outside edges 0.015 in. min 0.045 in. max by 45.0 deg
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic acetal
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
recessed both sides
Answers.
1EA
Recessed both sides
Plastic acetal
0.123 inches minimum and 0.127 inches maximum
3.718 inches minimum and 3.720 inches maximum
1.094 inches
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-137-3958 WASHER,RECESSED
recessed both sides chamfer outside edges 0.015 in. min 0.045 in. max by 45.0 deg 0.123" material thickness 3.718" outside diameter 1.094" hole diameter
- NIIN
- 011373958
- NIIN Date
- 08/25/82
- Schedule B
- 3926904500
- Name Code
- 15933
- FIIG
- A022B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $34.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Turkey
Availability for 803-5001048 PIECE 65 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
803-5001048 PIECE 65 / Washer,recessedWhat is the formal definition of this item?
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.
