Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7419917 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
3.493in. and 3.498in. ⁓3-1/2"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
4.062in.
The length of a straight line which passes through the center of the recess,and terminates at the circumference.
3.844in.
A measurement of the smallest dimension of the material,in distinction from length or width.
1.000in.
43.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1015 and steel comp 1016 and steel comp 1017 and steel comp 1018 and steel comp 1019 and steel comp 1020 and steel comp 1021 and steel comp 1022 and steel comp 1023 and steel comp 1023w and steel comp 1524 and steel comp 1025
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
15 recessed
Answers.
15 recessed
Steel comp 1015 and steel comp 1016 and steel comp 1017 and steel comp 1018 and steel comp 1019 and steel comp 1020 and steel comp 1021 and steel comp 1022 and steel comp 1023 and steel comp 1023w and steel comp 1524 and steel comp 1025
1.000 inches
4.062 inches
3.493 inches minimum and 3.498 inches maximum
Schedule B number: 7318220000
nmfc 106940
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-741-9917 WASHER,RECESSED
15 recessed 1.000" material thickness 4.062" outside diameter 3.493" hole diameter
- NIIN
- 007419917
- NIIN Date
- 01/01/63
- Schedule B
- 7318220000
- Name Code
- 15933
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Austria
- - Denmark
- - Greece
- - Turkey
Availability for 7419917 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 55.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Iron or steel, structural, (less than 35 feet)(see 825)
- NMFC (national motor freight code)
- 106940 SPACERS/SEPARATORS I/S NOI TUBULAR
- UFC (universal freight code)
- 50675
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
7419917 / Washer,recessedWhat is the formal definition of this item?
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.
