Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 63-9088 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
3.010in. ⁓3-1/64"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
3.700in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.500in.
3.280in.
45.0 degrees
45.0 degrees
3.280in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 7075
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-282 T6 temp fed spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
recessed both sides
Answers.
1EA
Recessed both sides
Aluminum alloy 7075
0.500 inches
3.700 inches
3.010 inches
Schedule B number: 7616108000
nmfc 106940
Cotters, cotter-pins, washers and similar articles, of aluminum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-715-7190 WASHER,RECESSED
recessed both sides 0.500" material thickness 3.700" outside diameter 3.010" hole diameter
- NIIN
- 007157190
- NIIN Date
- 01/01/63
- Schedule B
- 7616108000
- Name Code
- 15933
- FIIG
- A022B0
- Item Weight
- 0.300lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $38.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Singapore
- - Canada
- - Turkey
Availability for 63-9088 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 55.0
- LCL (less than a car load rating)
- 55.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Iron or steel bars, (less than 35 feet)(see 822)
- NMFC (national motor freight code)
- 106940 SPACERS/SEPARATORS I/S NOI TUBULAR
- UFC (universal freight code)
- 50675
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
63-9088 / Washer,recessedWhat is the formal definition of this item?
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.
