Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 4D0028C9 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.037in. and 1.047in.
The length of a straight line which passes through the center of the recess,and terminates at the circumference.
0.564in. and 0.568in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.085in. and 0.101in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
38.0 rockwell c and 45.0 rockwell c
90.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec single material response or MIL-18729 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, TY2, CL2 fed spec single treatment response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
15 recessed
Answers.
15 recessed
Steel comp 4130
0.085 inches minimum and 0.101 inches maximum
1.037 inches minimum and 1.047 inches maximum
Schedule B number: 7318220000
Washers other than lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-422-8570 WASHER,RECESSED
15 recessed cadmium surface treated 0.085" material thickness 1.037" outside diameter
- NIIN
- 014228570
- NIIN Date
- 12/10/95
- Schedule B
- 7318220000
- Name Code
- 15933
- FIIG
- A022B0
- QUP
- Historical Price
- $4.98 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 4D0028C9 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
4D0028C9 / Washer,recessedWhat is the formal definition of this item?
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.
