Serving our customers with quality and safety first.
0.176in. and 0.178in. ⁓3/16"
0.447in. and 0.449in.
0.061in. and 0.063in.
0.276in. and 0.278in.
0.014in. and 0.016in.
test station, ELECTRICAL-Electronic e
cross pattern milled 0.059 min to 0.061 max wide to second id to create four tabs
plastic polyhexamethylene adipamide
recessed
1EA
Recessed
Plastic polyhexamethylene adipamide
0.447 inches minimum and 0.449 inches maximum
0.176 inches minimum and 0.178 inches maximum
Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on test station, electrical-electronic e. recessed cross pattern milled 0.059 min to 0.061 max wide to second id to create four tabs 0.447" outside diameter 0.176" hole diameter
1. | 91755A22 | Cage 3A054 |
Nothing similar to this part number was found in our inventory
A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.