140-007-25-22A3

1400072522A3 Recessed Washer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 140-007-25-22A3 specification

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.391in. and 0.401in. ⁓13/32"

Outside Diameter
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.

0.678in. and 0.698in.

Material Thickness
A measurement of the smallest dimension of the material,in distinction from length or width.

0.089in. and 0.099in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

240000 pounds per square inch

Top Recess Diameter

0.421in. and 0.441in.

Bottom Recess Angle

90.0 degrees

Top Recess Angle

90.0 degrees

Bottom Recess Diameter

0.421in. and 0.441in.

Surface Finish
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

63.0 microinches all surfaces

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

as fabricated

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp H11

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS6485 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-8837, ty 2, cl 2 mil spec single treatment response

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

recessed both sides

Answers.

What is the style?

Recessed both sides

What material is the recessed washer made of ?

Steel comp h11

What is the thickness?

0.089 inches minimum and 0.099 inches maximum

What is the outside diameter?

0.678 inches minimum and 0.698 inches maximum

What is the inside hole diameter?

0.391 inches minimum and 0.401 inches maximum

What is the NSN for 140-007-25-22A3?

5310-01-025-3491

How is this classified for shipping?

Schedule B number: 7318220000
nmfc 194120
Washers other than lock washers, iron or steel

What's the federal classification of 140-007-25-22A3?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

NSN 5310-01-025-3491 WASHER,RECESSED

recessed both sides cadmium surface treated 0.089" material thickness 0.678" outside diameter 0.391" hole diameter

NIIN
010253491
NIIN Date
07/30/76
Schedule B
7318220000 
Name Code
15933
FIIG
A022B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$33.30 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Army 
  • - Department of The Navy 
  • - Turkey 

Availability for 140-007-25-22A3 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
194120 WASHERS/GASKETS/PCKG DVCS NOI 
UFC (universal freight code)
95100 

Similar by Design Other washers with similar characteristics

Nothing similar to this part number was found in our inventory

140-007-25-22A3 / Washer,recessedWhat is the formal definition of this item?

A washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.