Serving our customers with quality and safety first.
0.212 mm and 0.288 mm
3.5 mm
push on
8.45 mm and 8.95 mm
hardness rockwell 30n 58.0 min and 68.0 max
steel comp 1050
phosphate
gm 4435-m, code a, fscm 11862 mfr ref single treatment response
Steel comp 1050
0.212 millimeters minimum and 0.288 millimeters maximum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
phosphate surface treated hardness rockwell 30n 58.0 min 0.212mm material thickness
1. | 11504116 | Cage 7X677 |
2. | 11504116 | Cage 11862 |
3. | C1769755-010 | Cage 78553 |
Nothing similar to this part number was found in our inventory
An item formed from sheet spring material into varying flat, concave, curved, or nutlike design. it has an aperture with an elliptical-shaped hole or suitable lugs or prongs designed to retain threaded or unthreaded stud like projecting memebers. when pushed on, it grips by imbedding into the material of the projecting memebers, and does not mate with a thread helix. see also ring, retaining.