Serving our customers with quality and safety first.
3b
RIGHT-Hand
0.270in.
0.146in. and 0.176in.
spline (floating)
0.557in. and 0.587in. ⁓19/32"
0.376in. and 0.436in. ⁓7/16"
0.375in. and 0.405in. ⁓13/32"
unjf
floating nut
32
0.190in. ⁓13/64"
nut dry film lubricant
steel comp 1050 nut
steel comp 1075 bracket
steel comp 304 boss
aisi assn std single material response bracket
ams 5085 assn std single material response nut
QQ-S-763 fed spec single material response boss
cadmium and chromate
QQ-P-416, ty 2, cl 3 fed spec single treatment response
Steel comp 304 boss
Steel comp 1075 bracket
Steel comp 1050 nut
32
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated nut dry film lubricant 32 thread quantity per inch right-hand 3b thread class
1. | FFL6010NL10C | Cage D9182 |
2. | FFL6010NL10C | Cage 17446 |
3. | 5546382-7 | Cage 53711 |
4. | FF6010-NL-10-C | Cage 0HDW7 |
5. | FF6010NL-10C-B | Cage 0HDW7 |
6. | FFL6010-10-C | Cage 0HDW7 |
7. | 717835-75 | Cage 05869 |
8. | ES8411-160 | Cage 20418 |
9. | 4245260-038 | Cage 04660 |
10. | FFL6010-10-C | Cage 97928 |
11. | FF6010-NL-10-C | Cage 97928 |
12. | FF6010NL-10C-B | Cage 97928 |
Nothing similar to this part number was found in our inventory
A nut having an externally splined sleeve which holds it in position when forced into a hole of slightly smaller diameter.