130180-1 Plain Spline Nut

Datasheet. 130180-1 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Pilot Diameter
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

0.185in. and 0.188in.

Pilot Length
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.

0.102 mils and 0.108 centimeters

Nut Diameter

0.250in.

Nut Height

0.199in. ⁓13/64"

Thread Series
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

unc

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.138in. ⁓9/64"

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

zzzy

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A582 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Special Test Features
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

special quality control testing

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Departure From Cited Document
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.

as modified by material

Reference Number Differentiating Characteristics
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.

as differentiated by material which must confrom to ships parts control center special quality control provisions

Answers.

What material is the plain spline nut made of ?

Steel comp 303

What is the thread quantity per inch?

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for 130180-1?

5310-01-320-8626

How is this classified for shipping?

Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel

What's the federal classification of 130180-1?

FSC 5310 ⁓ Nuts and washers

Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).

1.	P00451NRP	Cage 14153
2.	LL-HQ6-4869	Cage 14153

130180-1

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 130180-1 specification

Answers.

NSN 5310-01-320-8626 NUT,PLAIN,SPLINE

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for 130180-1 A member of our team will provide you with a price and availability quote

Shipping Information

Similar by Design Other nuts with similar characteristics

130180-1 / Nut,plain,splineWhat is the formal definition of this item?