Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 65664-05038-101 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
0.250in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
round
3.530in.
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.
0.400in.
0.400in.
4
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.
0.072in. and 0.082in.
Indicates the type and number of holes provided.
8 drilled
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unj
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
331.0 brinell hultgren and 401.0 brinell hultgren
A designation that is used for the purpose of general identification of the thread.
3.000in. ⁓3-1/64"
The style designation that most nearly corresponds to the appearance of the hole configuration.
configuration j
The included angle of the countersink.
90.0 degrees both ends
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
magnetic particle inspect; groove, 0.100 in. w on ctr od; paired holes meet at ctr groove; chamfer, 45.0 deg, 0.063 in. lg, both ends
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-12
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5659 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
SS8435, cage code 78286 mfr ref single treatment response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
78286-SS805 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
Steel comp xm-12
16
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-306-6034 NUT,PLAIN,ROUND
passivate surface treated magnetic particle inspect; groove, 0.100 in. w on ctr od; paired holes meet at ctr groove; chamfer, 45.0 deg, 0.063 in. lg, both ends navy special project 16 thread quantity per inch right-hand 3b thread class
- NIIN
- 013066034
- NIIN Date
- 08/26/89
- Schedule B
- 7318160000
- Name Code
- 15887
- FIIG
- A021A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $1,100.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 65664-05038-101 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
65664-05038-101 / Nut,plain,roundWhat is the formal definition of this item?
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
