Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 4-141-072-01 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The minimum and maximum pitch diameter limits of a straight screw thread.
+0.1697/+0.1726in.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.190in. and 0.210in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
plate
A measurement of the longest dimension of the nut,in distinction from width.
0.940in. ⁓61/64"
0.250in. ⁓1/4"
A measurement of the smallest dimension of a plate,in distinction from length or width.
0.047in.
A measurement taken at right angles to the length of a plate,in distinction from thickness.
0.308in. and 0.328in.
The means by which the nut is mounted.
countersunk holes or dimpled holes or straight holes
The side of the plate that the countersink or welding projections are located.
opposite nut projection side
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).
2 holes
0.339in. and 0.349in.
A measurement of the center to center distance between the mounting holes along the length.
0.686in. and 0.690in.
The national stock number or the identification information of the end equipment for which the item is a part.
LTS101-750A1 engine acft turbo shaft
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
800.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
49.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
The included angle of the mounting hole countersink.
100.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MS21048 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
silver
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MS21048 mil spec single treatment response
Answers.
Iron alloy 660
32
Right-hand
3b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-127-3995 NUT,PLAIN,PLATE
Used on lts101-750a1 engine acft turbo shaft. silver surface treated 32 thread quantity per inch right-hand 3b thread class
- NIIN
- 011273995
- NIIN Date
- 02/27/82
- Schedule B
- 7318160000
- Name Code
- 01872
- FIIG
- A021A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Availability for 4-141-072-01 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
4-141-072-01 / Nut,plain,plateWhat is the formal definition of this item?
A nut with a flanged base of varied shapes which may be plain or mounted by rivets, bolts, welding, intergral prongs or by bonding.
