Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. KN-625 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of the small end,and terminates at the circumference.
1.000in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
knurled
1.375in.
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.
0.500in.
0.375 in.
0.125in.
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.
0.250in.
Indicates the type and number of holes provided.
4 drilled
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unc
Those features,not otherwise specified,which may be required for proper functioning of the item.
casehardened
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
11
A designation that is used for the purpose of general identification of the thread.
0.625in. ⁓5/8"
The style designation that most nearly corresponds to the appearance of the hole configuration.
configuration f
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1213
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924 mil spec single treatment response
Answers.
Steel comp 1213
11
Right-hand
2b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-099-9530 NUT,PLAIN,KNURLED
oxide surface treated 11 thread quantity per inch right-hand 2b thread class
- NIIN
- 010999530
- NIIN Date
- 08/27/80
- Schedule B
- 7318160000
- Name Code
- 15886
- FIIG
- A021A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Availability for KN-625 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
KN-625 / Nut,plain,knurledWhat is the formal definition of this item?
A nut, round in shape, having all or part of its outer surface knurled. it may have provisions for external wrenching. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, round. (when height or thickness, and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance).
