Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. B147-1-279 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
knurled
1.375in.
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.
0.250in.
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unef
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.938in. ⁓61/64"
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 or steel comp 303se
Answers.
1EA
Steel comp 303 or steel comp 303se
20
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-093-8461 NUT,PLAIN,KNURLED
20 thread quantity per inch right-hand 2b thread class
- NIIN
- 010938461
- NIIN Date
- 04/25/80
- Schedule B
- 7318160000
- Name Code
- 15886
- FIIG
- A021A0
- QUP
- 1
- Historical Price
- $3.53 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for B147-1-279 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
B147-1-279 / Nut,plain,knurledWhat is the formal definition of this item?
A nut, round in shape, having all or part of its outer surface knurled. it may have provisions for external wrenching. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, round. (when height or thickness, and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance).
