Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.088in. and 0.099in. ⁓7/64"
0.423in. and 0.437in. ⁓7/16"
unf
28
0.216in. ⁓7/32"
chamfered or washer faced
copper alloy 462 or copper alloy 464 or copper alloy 482 or copper alloy 485
QQ-B-637 fed spec all material responses
2 type and 13 style
as modified by bearing surface and as modified by machine finish and as modified by heighth
1HD
Copper alloy 462 or copper alloy 464 or copper alloy 482 or copper alloy 485
28
Right-hand
2b
Schedule B number: 7415290000
nmfc 093460
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
28 thread quantity per inch right-hand 2b thread class
1. | FFN836 | Cage 81348 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)