Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
0.125in. ⁓1/8"
0.428in. and 0.440in. ⁓29/64"
unf
28
80.0 rockwell b and 32.0 rockwell c
0.250in. ⁓1/4"
110.0 degrees nut
chamfered
steel
cadmium
QQ-P-416, ty 2, cl 2 fed spec single treatment response
2 type and a grade
1HD
Steel
28
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 28 thread quantity per inch right-hand 3b thread class
1. | FF-N-836 | Cage 81348 |
2. | 8192710 | Cage 18876 |
3. | Z00-N5328303305 | Cage F0086 |
4. | 404 322 | Cage 77294 |
5. | 404 332 | Cage 77294 |
6. | 23AN316-4R | Cage 80045 |
7. | AN316-4R | Cage 80205 |
8. | 802752-00 | Cage 32345 |
9. | 094-03000 | Cage 33269 |
10. | 114-0020-01 | Cage 94756 |
11. | AN316-4 | Cage 88044 |
12. | AN316-4R | Cage 88044 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)