Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ROC-4978-011 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The national stock number or the identification information of the end equipment for which the item is a part.
4935-01-504-0206 test set, guided missile
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
locknut
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
stainless steel 10-24 esna; 3 required per handle
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
1EA
Steel
Right-hand
Schedule B number: 7318160000
nmfc 093470
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-559-4720 NUT,PLAIN,HEXAGON
Used on 4935-01-504-0206 test set, guided missile. stainless steel 10-24 esna; 3 required per handle locknut right-hand
- NIIN
- 015594720
- NIIN Date
- 12/19/07
- Schedule B
- 7318160000
- Name Code
- 01857
- FIIG
- A021A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 1-030-11729 | Cage 11214 |
| 2. | L79NM-1024 | Cage 27687 |
Major End Users Countries and entities
- - Department of The Army
Availability for ROC-4978-011 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093470 BOLTS/NUTS I/S
- UFC (universal freight code)
- 48940
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
ROC-4978-011 / Nut,plain,hexagonWhat is the formal definition of this item?
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
